EINHELL GC-CS 85 User Manual

GB
- 23 -
Service information
We have competent service partners in all countries named on the guarantee certifi cate whose contact
details can also be found on the guarantee certifi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes
Consumables* grinding wheels
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_GC_CS_85_SPK7.indb 23Anl_GC_CS_85_SPK7.indb 23 02.12.15 15:4302.12.15 15:43

EINHELL GC-CS 85 Specifications

General

Bore size	23 mm
Idle speed	5500 RPM
Maximum power	85 W
Grinding wheel diameter	108 mm
Grinding wheel thickness	3.2 mm
Continuous operating time @ maximum power	20 min
Power source	AC
AC input voltage	230 V
AC input frequency	50 Hz

Weight and Dimensions

Weight	1900 g
Package depth	210 mm
Package width	260 mm
Package weight	2600 g