M
Mitchell TuckerJul 28, 2025
Why is the chain/guide bar of my EINHELL GE-LM 36/4in1 Li hot?
- MMatthew Smith MDJul 28, 2025
If the chain or guide bar of your EINHELL Power Tool is getting hot, it could be due to several reasons: * There's no oil in the tank: Top up with oil. * The vent in the oil tank cap is blocked: Clean the oil tank cap. * The oil outlet is blocked: Clear the oil outlet. * The chain is blunt: Re-sharpen or replace the chain. * The chain is overtensioned: Check the chain tension.












