EasyManua.ls Logo

EINHELL BSF 55 - User Manual

EINHELL BSF 55
80 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Bedienungsanleitung
Benzinmotor-Schneefräse
Operating Instructions
Petrol Snow Plow
Bruksanvisning
Bensindriven snöslunga
Betjeningsvejledning til
snefræser med benzinmotor
q
Käyttöohje
Bensiinimoottorikäyttöinen lumilinko
p Mode d’emploi
chasse neige à fraise à moteur essence
C Istruzioni per l’uso
Fresaneve a benzina
j Návod k obsluze
Sněhová fréza s benzinovým motorem
X Navodila za uporabo
bencinske motorne freze za sneg
W Návod na obsluhu
Snežná fréza s benzínovým motorom
BSF 55
Art.-Nr.: 34.170.60 I.-Nr.: 01016
Anleitung BSF 55_SPK7:_ 14.01.2008 8:58 Uhr Seite 1

Table of Contents

Questions and Answers

  • L
    Lauren HardyAug 7, 2025
    Why EINHELL Snow Blower engine does not run?
    • L
      Lisa MorrisAug 7, 2025
      The engine may not be running due to several reasons. First, ensure the throttle lever is correctly positioned. Second, the spark plug might be defective and needs replacement. Third, the fuel tank could be empty, requiring you to top up the fuel. Finally, check if the petrol cock is closed and open it.
  • E
    Erica LyonsAug 11, 2025
    What to do if EINHELL Snow Blower engine will not start or dies?
    • E
      Elizabeth ElliottAug 11, 2025
      If the engine won't start or dies shortly after starting, it could be due to a few reasons. The automatic oil cut-out might have tripped; check the oil level and top up if necessary. Also, the spark plug could be sooted; clean or replace it, ensuring the electrode spacing is 0.6 mm. Finally, ensure there is enough fuel in the tank and top it up if needed.
  • B
    Bradley BurtonAug 16, 2025
    What to do if EINHELL Snow Blower has inadequate or no ejection?
    • J
      Jose RichardsonAug 16, 2025
      If you're experiencing inadequate or no snow ejection, it could be due to a blockage in the snow ejection unit. Clear the unit using a solid object. Another possible cause is the plow screw not turning, in which case you should adjust the clutch cable. Lastly, check the shearing bolts; if they are sheared, replace them or contact authorized customer service.
  • Y
    yvonne96Aug 19, 2025
    Why EINHELL Snow Blower engine does not run smoothly?
    • R
      Ryan LucasAug 19, 2025
      If the engine isn't running smoothly, it could be because the air filter is dirty; clean it. Alternatively, the spark plug might be dirty, so clean that as well.
  • D
    Donna JonesAug 25, 2025
    What to do if EINHELL Snow Blower is not removing snow fully?
    • D
      Destiny MooreAug 25, 2025
      If the snow is not being removed fully, it may be caused by maladjusted skids. Adjust the skids.
  • C
    Christopher MartinezAug 29, 2025
    Why EINHELL Snow Blower drive power falls?
    • K
      khaneyAug 29, 2025
      If the drive power is falling, it may be because the clutch play is too large. In this case, adjust the clutch cable. If the problem persists, contact authorized customer service.
  • S
    Shannon MullinsSep 2, 2025
    How to fix EINHELL Snow Blower that vibrates intensively?
    • F
      flucasSep 2, 2025
      To address intensive vibrations, first check the bolts. Also, check the plow unit mounting.

EINHELL BSF 55 Specifications

General IconGeneral
Working width55 cm
Engine4-stroke
Fuel Tank Capacity3.6 L
Max. Snow Throwing Distance10 m
Displacement163 cc

Related product manuals