To Next PageTo Next Page
Need help?Do you have a question about the EINHELL BT-ML 300 and is the answer not in the manual?
General| Purpose | Metalworking |
|---|---|
| PC connected | - |
| Spindle bore | 20 mm |
| Product color | Blue |
| Rotational speed (max) | 2500 RPM |
| Rotational speed (min) | 0 RPM |
| Distance between centers | 90 mm |
| Motor power | 370 W |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 755 mm |
|---|---|
| Width | 325 mm |
| Height | 330 mm |
| Weight | 34800 g |
| Package weight | 38600 g |
Essential steps and checks before operating the metal lathe.
Guidelines for safely connecting the equipment to the main power supply.
Information about the function and importance of the chuck safety guard.
Instructions for safely turning the lathe on and off, including emergency stop.
How to adjust and select the operating speed using the speed controller and selector.
Comprehensive section on various turning operations and techniques.
Procedure for performing longitudinal turning operations on the workpiece.
Steps for executing transverse turning, moving the tool towards the workpiece axis.
Technique for thread cutting, emphasizing low speed and lubrication.
