EasyManua.ls Logo

EINHELL BT-VC 1500 SA - Important Notes; Items Supplied; Ordering Replacement Parts; Proper Use

EINHELL BT-VC 1500 SA
42 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
Important notes
Attention: Before assembly and starting
operation, read the operating instructions
carefully.
Check that the mains voltage corresponds to
the details on the type plate.
Only connect to a proper 230 volt, 50 Hz
erthed socket.
Minimum fuse protection 10 A,
Pull the mains plug out of the socket when:
the unit is not in use,
before opening the unit,
before cleaning and maintenance
Never clean with solvents.
Do not use the cable to pull the plug out of the
socket.
When unit is ready for use, do not leave
unattended.
Safeguard from children
Care must be taken that the mains connection
lead is not damaged by being driven over,
crushed, stretched, etc.
The unit must not be operated if the mains
connection lead is notin perfect condition.
Replacement mains connection leads must not
differ from the versions indicated by the
manufacturer Mains connection cable:
H 05 VV - F 3 x 1,5 mm
2
On no account vacuum:
burning matches, glowing ashes and cigarette
ends, inflammable, corrosive, fire hazard or
explosive substances, vapours and liquids.
This unit is not suitable for vacuuming dust
which is damaging to health.
Store the unit in a dry place.
Do not operate a defective unit.
Servicing only by an authorized after-sales
service point.
Use only for operations for which the unit is
intended.
Take great care when cleaning stairs.
Use only manufacturerʼs attachments and
spare parts.
Proper use
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Items supplied
1 Handle
2 Automatic switch
3 ON/OFF switch
4 Top section
5 Filter basket
6 Safety float valve
7 Automatic socket-outlet for electric tools
8 Water drainage screw
9 Clasp
10 Container
11 Vacuum hose connection
12 Rollers
13 Flexible vacuum hose
14 Tube
15 Dual purpose nozzle
16 Blow connector
17 Crevice nozzle
18 Pleated filter
19 Foamed plastic filter
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB
Anleitung BT-VC 1500 SA_SPK1:Anleitung INOX 30A 29.04.2008 15:41 Uhr Seite 5

Related product manuals