To Next PageTo Next PageWhat to do if my EINHELL Heater does not heat up?
If your EINHELL Heater isn't heating up, there are several potential causes. First, ensure the mains plug is properly inserted into the socket. Second, check that the thermostat controller isn't set too low; turn it to the right to increase the temperature. Finally, the overheating guard may have been triggered.
Why does the ventilator of my EINHELL CH 2000/1 Heater (CH-2000/1 TT) not work?
If the ventilator on your EINHELL Heater (CH-2000/1 TT) isn't working, the ventilator switch might be switched OFF. Switch it on to resolve this.
General| Type | Radiator/fan |
|---|---|
| Timer | Yes |
| Number of power levels | 3 |
| Heating power | 2000 W |
| Heating power (min) | - W |
| AC input voltage | 230 V |
| AC input frequency | 50 - 60 Hz |
| Control type | Buttons, Rotary |
| Suitable for | Indoor |
| Product color | Gray |
| Housing material | Metal |
| Heat source | Electric |
Weight and Dimensions| Depth | 200 mm |
|---|---|
| Width | 590 mm |
| Height | 425 mm |
| Weight | 3560 g |
| Package depth | 140 mm |
| Package width | 620 mm |
| Package height | 400 mm |
| Package weight | 4280 g |
Instructions for assembling the convector heater for free standing or wall mounting.
Details on how to use the low, medium, and maximum heat output switches.
Explanation of the thermostat control for maintaining room temperature.
Instructions for operating the ventilator function for heating or cooling.
How to use the time switch for automatic ON/OFF operation of the convector.
Guidance on how to clean the convector heater safely and effectively.
Information regarding internal maintenance requirements for the appliance.
Information required for ordering replacement parts for the convector heater.
