A
Ashley SmithAug 2, 2025
What to do if my EINHELL GCH 2000 does not heat?
- CChristine GallegosAug 3, 2025
If your EINHELL Heater isn't heating, check the following: * Ensure the power plug is properly connected. * Verify that the main switch is turned on. * Make sure the heater isn't in standby mode or that the antifreeze function isn't active by setting the desired heat output (1000 W / 2000 W). * Increase the temperature setting if the thermostat is set too low. * Also, check if the overheating guard has triggered; refer to section 7.5 for instructions.