To Next PageTo Next PageWhy is my EINHELL HKLO 2000 Heater blowing cold air?
If your EINHELL Heater is blowing cold air, it might be due to several reasons. First, check if the thermostat control is set too low; turn it to the right to increase the temperature. Also, ensure that the switch is set to a heating function and not just blowing air. The overheating guard may also have been triggered; please note section 7.4.
How to fix EINHELL Heater that is not heating?
If your EINHELL Heater is not heating, there could be a few reasons. Make sure the thermostat control isn't set too low by turning it to a higher temperature. Also, verify that the switch is set to a heating function. The overheating guard may have been triggered; please note section 7.4.
Why EINHELL Heater isn't turning on?
If your EINHELL Heater isn't turning on, make sure the power plug is connected properly. Also, the heater has a topple cut-out switch; ensure the machine is placed on a level surface.
General| Power | 2000 W |
|---|---|
| Heat Settings | 2 |
| Thermostat | Yes |
| Voltage | 220-240 V |
| Frequency | 50 Hz |
| Heating Type | Fan Heater |
| Overheat Protection | Yes |
| Oscillation | No |
