EINHELL GC-PT 2538/1 I AS User Manual

23
GB
Fault Possible cause Troubleshooting
The machine does not start. Correct starting procedure not
followed.
Follow the instructions for starting.
Sooted or damp spark plug Clean the spark plug or replace it
with a new one.
Incorrect carburetor setting Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
The machine starts but does not
develop its full output.
Incorrect choke lever setting Set choke lever to “ ”
Soiled air filter Clean the air filter
Incorrect carburetor setting Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
The engine does not run smoothly Incorrect electrode gap on the
spark plug
Clean the spark plug and adjust
the electrode gap or fit a new spark
plug.
Incorrect carburetor setting Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Engine smokes excessively Incorrect fuel mix Use the correct fuel mix (see fuel
mixing table)
Incorrect carburetor setting Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
11. Troubleshooting
Anleitung_GC_PT_2538_1_I_AS_SPK7__ 14.05.2019 13:33 Seite 23

EINHELL GC-PT 2538/1 I AS Specifications

General

Type	String trimmer
Head type	-
Handle type	D-loop handle
Cutting width	380 mm
Line diameter	2 mm
Product color	Black, Grey, Red
Rotational speed	8500 RPM
Number of strokes	2
Fuel tank capacity	0.45 L
Brand compatibility	Einhell
Engine displacement	25.4 cm³
Line length supplied	4 m
Cutting diameter (max)	- mm
Power source	Gasoline

Weight and Dimensions

Width	280 mm
Length	1023 mm
Weight	5400 g
Package weight	7500 g