EINHELL GC-RT 1440 M User Manual

GB
- 17 -
3. Proper use
The machine is designed for digging soil (for
example garden beds). Be sure to observe the
restrictions in the safety instructions.
The operating instructions as supplied by the ma-
nufacturer must be kept and referred to in order
to ensure that the machine is properly used and
maintained. The instructions contain valuable
information on operating, maintenance and servi-
cing conditions.
For safety reasons, the machine may not be used
as a drive unit for other work tools or tool sets of
any kind.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Voltage .....................................220-240V ~ 50Hz
Power input ............................................. 1400 W
Working width ............................................40 cm
Hoe diameter .............................................20 cm
Idle speed .............................................. 280 rpm
Number of blades ..................................6 pieces
Danger!
Sound and vibration
L
pA
sound pressure level ................... 71.71 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ..................... 91.71 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with EN 60745.
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s
2
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear protec-
tion is used.
3. Health damage caused by hand-arm vib-
rations if the equipment is used over a pro-
longed period or is not properly guided and
maintained.
Anl_GC_RT_1440_M_SPK7.indb 17Anl_GC_RT_1440_M_SPK7.indb 17 29.09.2016 11:30:3829.09.2016 11:30:38

EINHELL GC-RT 1440 M Specifications

General

Device type	Electric mini tiller
Tilling depth (max)	200 mm
Tilling width (max)	400 mm
Adjustable tilling width	No

Weight and Dimensions

Weight	11570 g