EINHELL GE-CM 36/47 S HW Li

Questions and Answers

H
hanthonyAug 4, 2025
Why EINHELL GE-CM 36/47 S HW Li motor does not start?
- R
  Robert SmithAug 4, 2025
  If the EINHELL Lawn Mower motor doesn't start, several factors could be the cause. It might be due to disconnected motor terminals, which requires a check by a customer service workshop. Alternatively, the mower might be standing in high grass; try starting it on shorter grass or an already mowed area, adjusting the cutting height if needed. Another cause could be a clogged mower housing, so clean the housing to allow the blade to run freely. Also, ensure the safety plug is inserted correctly and the battery is properly inserted, following the instructions in the manual.
D
Diana WatsonAug 11, 2025
What to do if EINHELL Lawn Mower drive motor does not start?
- S
  Susan MartinezAug 12, 2025
  If the drive motor of your EINHELL Lawn Mower fails to start, possible causes include disconnected motor terminals (have it checked by a customer service workshop), the machine standing in high grass (start on shorter grass, adjust cutting height), or a clogged mower housing (clean the housing). Also, check if the safety plug is properly inserted and the battery is correctly inserted. Finally, the thermal cut-out switch may have tripped; let the equipment cool down for at least 10 minutes.
J
Joseph Pham MDAug 19, 2025
Why EINHELL Lawn Mower motor performance drops?
- R
  Ronald ClarkAug 19, 2025
  If your EINHELL Lawn Mower's motor performance drops, it could be due to several reasons. The grass might be too tall or damp, so correct the cutting height. The mower housing could be clogged, requiring you to clean it. The blade might be badly worn, in which case you should replace it. Additionally, the battery performance might be decreasing, so check the battery and charge it if necessary.
C
Carmen MurphyAug 27, 2025
How to fix unclean cuts with EINHELL GE-CM 36/47 S HW Li?
- B
  Brandon BoothAug 27, 2025
  If your EINHELL Lawn Mower is making unclean cuts, the blade might be worn, requiring replacement or resharpening. Alternatively, the cutting height might be incorrect, so adjust it to the proper depth.

Summary

Safety Regulations

Layout and Items Supplied

Layout (Fig. 1;2;5)

Overview of the lawn mower's components and their identification.

Items Supplied and Unpacking (Fig. 2)

Lists all components included in the package and how to unpack them.

Proper Use

Technical Data

Before Using the Equipment

Fitting the Push Bar (Fig. 3 to 6)

Instructions for assembling the push bar to the lawn mower.

Fitting the Drive Speed Control Unit (Fig. 7-12)

Steps to attach the drive speed control unit to the push bar.

Fitting the Grass Basket (Fig. 13)

Guide on how to attach the grass collection basket.

Filling Level Indicator of the Grass Collector (Fig. 23)

Explanation of the indicator that shows when the grass collector is full.

Adjusting the Cutting Height

Instructions for setting the desired grass cutting height.

Cutting Height Adjustment (Fig. 18)

Detailed steps for adjusting the cutting height using the lever.

Using the Mulching Adapter (Fig. 15 a)

How to attach and use the mulching adapter for grass shredding.

Rear Ejector (Fig. 14)

Instructions for using the rear grass ejection feature.

Side Ejector (Fig. 15 b)

How to attach the side ejector adapter for grass discharge.

Charging the Battery (Fig. 21)

Steps for connecting the battery charger and charging the battery pack.

Installing the Battery (Fig. 22)

Guide on correctly inserting the battery packs into the lawn mower.

Battery Capacity Indicator (Fig. 20)

How to check the battery charge level using the indicator LEDs.

Operation

Drive Unit

How to engage and use the drive system for self-propulsion.

Setting the Speed (Vario Speed)

Adjusting the lawn mower's forward speed using the speed adjuster lever.

Tips for Proper Mowing

Recommendations for effective and aesthetically pleasing lawn mowing.

Cleaning, Maintenance, and Ordering of Spare Parts

Cleaning

Instructions and recommendations for cleaning the lawn mower.

Maintenance

Procedures and checks for maintaining the lawn mower's components.

Replacing the Blade

Step-by-step guide for safely replacing the lawn mower blade.

Ordering Replacement Parts

Information required when ordering spare parts for the mower.

Storage and Transport

Storage

Guidelines for storing the lawn mower and accessories safely.

Transportation

Instructions for safely transporting the lawn mower.

Disposal and Recycling

Charger Indicator

Ready for Use

Explanation of the LED status when the charger is ready.

Charging

Meaning of the LED indicators during battery charging.

Battery Charged and Ready for Use

LED status when the battery is fully charged and in gentle charging mode.

Adapted Charging

Explanation of the LED status for gentle charging mode.

Fault

LED status indicating a defective battery or charger.

Temperature Fault

LED status indicating battery temperature issues.

Troubleshooting

Motor Does Not Start

Identifies possible causes and remedies for the motor failing to start.

Drive Motor Does Not Start

Troubleshooting steps for when the drive motor fails to operate.

Motor Performance Drops

Diagnosing and fixing issues related to reduced motor power.

Unclean Cuts

Causes and solutions for uneven or poor grass cutting results.

Service Information

Warranty Certificate

EINHELL GE-CM 36/47 S HW Li Specifications

General

Type	-
Cutting width	470 mm
Product color	Black, Red
Rotational speed	3300 RPM
Rear wheels diameter	280 mm
Front wheels diameter	200 mm
Recommended lawn area	700 m²
Maximum cutting height	65 mm
Minimum cutting height	30 mm
Grass collecting volume	75 L
Number of height positions	6
Cutting clearance adjustment	Yes
Power source	Battery
Battery voltage	18 V