EINHELL GE-CM 36/34 Li

Questions and Answers

T
travisandersonJul 29, 2025
What to do if my EINHELL GE-CM 36/34 Li motor fails to start?
- S
  stephanie73Jul 29, 2025
  If your EINHELL Lawn Mower motor fails to start, there are several potential causes. The motor terminals might be disconnected, requiring repair by a Customer Service Center. Alternatively, the mower might be standing in high grass; try starting in low grass or on an area that has already been mowed, adjusting the cutting height if needed. The mower housing could be clogged, so clean the housing to allow the blade to move freely. Ensure the safety switch is inserted correctly. Also, check that the battery is correctly inserted, removing and reinserting it if necessary.
R
Robert AdkinsAug 9, 2025
Why does my EINHELL Lawn Mower motor performance drop?
- H
  Heather BradfordAug 9, 2025
  A drop in motor performance in your EINHELL Lawn Mower can be attributed to several factors. The grass may be too high or too damp, requiring you to correct the cutting height. Another cause might be a clogged mower housing, which necessitates cleaning. Also, check if the blade is severely worn and needs replacement. Decreasing battery performance could also be the reason; in that case, check the battery performance and charge if necessary.
V
virginiawalkerSep 10, 2025
How to fix irregular cutting with my EINHELL GE-CM 36/34 Li?
- Z
  Zachary ReidSep 12, 2025
  Irregular cutting with your EINHELL Lawn Mower can often be resolved by addressing a worn blade, which should be replaced or resharpened. Also, ensure that you have the correct cutting height.

Summary

Safety Regulations

Layout and Items Supplied

Layout (Fig. 1;2)

Items Supplied and Unpacking (Fig. 2)

Proper Use

Before Starting the Equipment

Fitting the Push Bar

Instructions for assembling the push bar and adjusting its angle.

Fitting the Catch Basket

Adjusting the Cutting Height

Step-by-step instructions for setting the desired cutting height.

Operation

Charging the Battery

Procedure for charging the battery pack using the provided charger.

Fitting the Battery

Instructions on how to insert and secure the battery into the equipment.

Cleaning, Maintenance and Ordering of Spare Parts

Cleaning

Maintenance

Replacing the Blade

Detailed instructions for safely replacing the cutting blade.

Storage and Transport

Charger Indicator

Troubleshooting

EINHELL GE-CM 36/34 Li Specifications

General

Power source	Battery
Charging time	100 h
Battery voltage	18 V
Battery capacity	3 Ah
Battery low indication	Yes
Type	Push lawn mower
Cutting width	335 mm
Product color	Black, Red
Number of wheels	4 wheel(s)
Rotational speed	3400 RPM
Maximum lawn area	300 m²
Handle(s) features	Foldable
Rear wheels diameter	180 mm
Front wheels diameter	150 mm
Maximum cutting height	65 mm
Minimum cutting height	25 mm
Grass collecting volume	30 L
Number of height positions	5