Why does my EINHELL Trimmer smoke so much?
Excessive smoke from your EINHELL Trimmer could be due to an incorrect fuel mix. Ensure you are using the correct fuel mix as specified in the fuel mixing table. If the problem continues, the carburetor setting might be off, requiring attention from an authorized customer service outlet.
What to do if my EINHELL Trimmer starts but has no power?
If your EINHELL Trimmer starts but lacks full power, first check the choke lever setting and set it to the correct position. Also, a soiled air filter could be the cause, so try cleaning it. If neither of these steps helps, the carburetor setting may be incorrect, and you should contact an authorized customer service outlet.
Why EINHELL Trimmer engine does not run smoothly?
If the engine of your EINHELL Trimmer isn't running smoothly, it could be due to an incorrect electrode gap on the spark plug. Clean the spark plug and adjust the electrode gap, or replace it with a new one. If the issue persists, the carburetor setting may be incorrect; in this case, contact an authorized customer service outlet.
General| Power source | Electric AC |
|---|---|
| Line diameter | 2.4 mm |
| Product color | Black, Red |
| Rotational speed | 6000 RPM |
| Secondary handle | Yes |
| Line length supplied | 4 m |
| Cutting diameter (max) | 255 mm |
Weight and Dimensions| Weight | 8940 g |
|---|
Describes the function of protective guards for preventing thrown objects.
Explains the meaning of various warning symbols found on the equipment.
Details the component parts of the petrol power scythe with numerical references.
Lists all items supplied with the petrol power scythe.
Provides detailed technical specifications for the engine, cutting speeds, and dimensions.
Lists sound pressure, sound power levels, and vibration emission values.
Instructions for attaching the cutting blade guard hood.
Steps to join the drive rod mechanism to the connecting piece.
Guide for installing or changing the cutting blade.
Instructions for attaching the cutting line guard hood.
Steps for attaching the handle to the unit.
Guide for installing or changing the line spool.
Details the correct type and mixing ratio for fuel and oil.
Procedure for starting the engine when it is cold.
Procedure for starting the engine when it is warm.
Instructions for safely stopping the engine.
Guide on how to properly attach and adjust the shoulder strap.
Recommends practicing operations with the engine off before use.
Method for automatically extending the cutting line during operation.
Covers various techniques for trimming, mowing, and working near obstacles.
Addresses equipment limitations like sawing and handling jams.
How to avoid dangerous recoil when cutting solid objects.
Detailed steps for replacing the cutting line spool.
Instructions for sharpening the blade on the safety hood.
Procedure for checking and cleaning the air filter.
Steps for checking, cleaning, and replacing the spark plug.
Notes that carburetor settings should only be done by authorized personnel.
How to clean the equipment safely.
Guidelines for preparing the equipment for long-term storage.
Steps for safely transporting the petrol power scythe.
Information required when ordering spare parts.
To Next Page