EasyManua.ls Logo

EINHELL GH-PM 51 S HW - User Manual

EINHELL GH-PM 51 S HW
140 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
GH-PM 51 S HW
Art.-Nr.: 34.045.10 I.-Nr.: 11013
7
D Originalbetriebsanleitung
Benzin-Rasenmäher
GB Original operating instructions
Petrol Lawn Mower
F Mode d’emploi d’origine
Tondeuse à gazon à essence
I Istruzioni per l’uso originali
Tosaerba a benzina
NL Originele handleiding
Benzinemaaier
SLO Originalna navodila za uporabo
Bencinska kosilnica za travo
GR Πρωτότυπες Οδηγίες χρήσης
Βενζινοκίνητο χλοοκοπτικό
TR Orijinal Kullanma Talimatı
Benzin Motorlu Çim Biçme
Makinesi
Anl_GH_PM_51_S_HW_SPK7.indb 1Anl_GH_PM_51_S_HW_SPK7.indb 1 05.09.13 14:3005.09.13 14:30

Questions and Answers

  • J
    Jordan ElliottJul 27, 2025
    Why won't my EINHELL GH-PM 51 S HW start?
    • D
      Diana JonesJul 27, 2025
      If your EINHELL Lawn Mower engine isn't starting, there are several possible reasons: * The engine start/stop lever may not be pressed. Ensure you press the engine start/stop lever. * The throttle lever might be in the wrong position. Check the throttle lever setting. * The spark plug could be defective. Replace the spark plug. * The fuel tank may be empty. Refill the fuel tank.
  • J
    Joseph ClarkAug 2, 2025
    What to do if EINHELL Lawn Mower engine does not run smoothly?
    • P
      patrickmendozaAug 2, 2025
      If your EINHELL Lawn Mower engine isn't running smoothly: * The air filter may be dirty. Clean the air filter. * The spark plug might be dirty. Clean the spark plug.
  • K
    krollinsAug 8, 2025
    Why does my EINHELL GH-PM 51 S HW leave an uneven cut and yellow lawn?
    • J
      James WashingtonAug 8, 2025
      If your EINHELL Lawn Mower is leaving an uneven cut and causing the lawn to turn yellow, consider these potential causes: * The blade may not be sharp enough. Sharpen the blade. * The cutting height might be too low. Adjust the cutting height to the proper level. * The engine speed could be too low. Set the lever to the maximum speed.
  • T
    Terry WilliamsAug 14, 2025
    How to fix an EINHELL GH-PM 51 S HW Lawn Mower that vibrates intensively?
    • E
      Emily SimmonsAug 14, 2025
      If your EINHELL Lawn Mower is vibrating intensively and not operating smoothly, here are some things to check: * Bolts may be loose. Check the bolts and tighten if necessary. * The blade attachment could be loose. Check the blade attachment. * The blade might be imbalanced. Replace the blade.
  • P
    pateldanielAug 20, 2025
    Why is the grass chute not clean on my EINHELL Lawn Mower?
    • C
      Crystal BoydAug 20, 2025
      If the grass chute on your EINHELL Lawn Mower isn't clean, it could be due to several reasons: * The engine speed might be too low. Set the throttle lever to maximum. * The cutting height might be too small. Set it properly. * The blade could be worn. Replace the blade. * The grass bag might be clogged. Empty the grass bag.

Summary

Safety instructions for hand mower

Layout and items supplied

Technical data

Before starting the equipment

Operation

6.1 Before mowing

Pre-mowing checks and precautions, including dressing, blade inspection, and fuel/oil levels.

Cleaning, maintenance, storage, transport and ordering of spare parts

7.1 Cleaning

Instructions for thoroughly cleaning the lawn mower after each use, focusing on underside and blade.

7.2 Servicing

General guidance on maintenance intervals and procedures for the lawn mower.

7.2.2 Blades

Procedures for changing, sharpening, and inspecting the lawn mower blades for safety.

7.2.3 Oil level check

Method for checking the engine oil level to prevent damage.

7.2.8 Repair

Guidelines and warnings regarding repairs, including use of genuine parts and liability.

Warranty provisions

Warranty certificate

EINHELL GH-PM 51 S HW Specifications

General IconGeneral
BrandEINHELL
ModelGH-PM 51 S HW
CategoryLawn Mower
LanguageEnglish

Related product manuals