EINHELL GH-EH 4245 User Manual

GB
- 7 -
b) Carry the hedge trimmer by the handle
with the blade stopped and taking care
not to operate an power switch. Proper
carrying of the hedge trimmer will decrease
the risk of inadvertent starting and resultant
personal injury from the blades.
c) When transporting or storing the hedge
trimmer, always fi t the blade over. Proper
handling of the hedge trimmer will decrease
the risk of personal injury from the blades.
d) When clearing jammed material or ser-
vicing the unit, make sure all power
switches are off and the power cord is
disconnected. Unexpected actuation of the
hedge trimmer while clearing jammed materi-
al or servicing may result in serious personal
injury.
e) Hold the hedge trimmer by insulated
gripping surfaces only, because the
blade may contact hidden wiring or its
own cord. Blades contacting a „live“ wire
may make exposed metal parts of the hedge
trimmer „live“ and could give the operator an
electric shock.
f) Keep all power cords and cables away
from cutting area. Power cords or cables
may be hidden in hedges or bushes and can
be accidentally cut by the blade.
g) Do not use the hedge trimmer in bad wea-
ther conditions, especially when there is
a risk of lightning. This decreases the risk
of being struck by lightning.
Additional safety instructions
•
It is recommended to search the hedges and
bushes for hidden objects such as wire fenc-
ing and cables.
•
To further reduce the danger of electric
shock, we recommend that you use a residual
current device (RCD) with a trip current of 30
mA or less.
•
Hold the hedge trimmer correctly, for example
with both hands if it is fitted with two handles.
•
The hedge trimmer is designed for work
which the user can do when standing on the
ground and not on a ladder or any other un-
stable surface.
•
Before the hedge trimmer is used it is recom-
mended that the user makes sure that the
locking devices for any moving parts provided
(e.g. the extended shaft and the swivel com-
ponent) are in the locked position.
•
The hedge trimmer is designed for work
which the user can do when standing on the
ground and not on a ladder or any other un-
stable surface.
•
Before the hedge trimmer is used it is recom-
mended that the user makes sure that the
locking devices for any moving parts provided
(e.g. the extended shaft and the swivel com-
ponent) are in the locked position.
•
If the cutting mechanism becomes jammed
in thick branches, etc., stop using the hedge
trimmer immediately. Disconnect the power
plug before you start looking for the cause of
the blockage.
•
Proper inspection and maintenance of the
hedge trimmer is required at regular intervals.
Damaged blades should only be replaced as
pairs. If the trimmer is damaged by falling or
impact, it must be inspected by a qualified
person.
•
Do not use the hedge trimmer if it has a dam-
aged or excessively worn cutter.
•
Ensure that all handles and protective equip-
ment are properly fitted when you are using
the hedge trimmer.
This equipment is not designed to be used by
people (including children) with limited physical,
sensory or mental capacities or those with no
experience and/or knowledge unless they are
supervised by a person who is responsible for
their safety or they have received instructions
from such a person in to how to use the equip-
ment safely. Children must always be supervised
in order to ensure that they do not play with the
equipment.
Keep this safety information in a safe place.
Anl_GH_EH_4245_UK_SPK7.indb 7Anl_GH_EH_4245_UK_SPK7.indb 7 30.11.2023 08:46:5630.11.2023 08:46:56

EINHELL GH-EH 4245 Specifications

General

Engine power	420 W
Power source	AC
Blade type	Single blade
Product color	Orange

Weight and Dimensions

Depth	175 mm
Width	920 mm
Weight	2500 g