EINHELL GH-EH 4245 User Manual

GB
- 8 -
2. Layout and items supplied
2.1 Layout (Fig. 1/2)
1. Cutter rail
2. Hand guard
3. Steady grip with button switch
4. Handle with button switch
5. Cable strain-relief clamp
6. Power cable
7. Cutter guard
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Hedge trimmer
•
Cutter guard
•
Original operating instructions
•
Safety instructions
3. Proper use
Important. This hedge trimmer is suitable for cut-
ting hedges, bushes and shrubs.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Mains voltage: ............................... 230 V ~ 50 Hz
Power input: .............................................. 420 W
Idling speed: .......................................1,600 min
-1
Cutting length ......................................... 450 mm
Cutter rail length ..................................... 510 mm
Tooth spacing ........................................... 16 mm
Max. cutting thickness .............................. 12 mm
Cuts/min ...................................................... 3200
Protection class: ............................................ II/
쓑
Weight: .......................................................2.4 kg
Danger!
Sound and vibration
Sound and vibration values were measured in
accordance with EN 62841-1.
L
pA
sound pressure level ..................... 85,8 dB(A)
K
pA
uncertainty .............................................3 dB
L
WA
sound power level ....................... 96,8 dB(A)
K
WA
uncertainty .............................................3 dB
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 62841-1.
Vibration emission value a
h
= 3.301 m/s
2
K uncertainty = 1.5 m/s
2
Anl_GH_EH_4245_UK_SPK7.indb 8Anl_GH_EH_4245_UK_SPK7.indb 8 30.11.2023 08:46:5630.11.2023 08:46:56

EINHELL GH-EH 4245 Specifications

General

Engine power	420 W
Power source	AC
Blade type	Single blade
Product color	Orange

Weight and Dimensions

Depth	175 mm
Width	920 mm
Weight	2500 g