EasyManua.ls Logo

EINHELL HEROCCO 18/20 User Manual

EINHELL HEROCCO 18/20
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
HEROCCO 18/20
Art.-Nr.: 4513906 I.-Nr.: 21021
7
EN Operating instructions
Cordless Rotary Hammer
FR Mode d’emploi
Perceuse à percusssions sans l
SP Manual de instrucciones
Taladro percutor / rotomartillo
inalambrico
Anl_Herocco_18_20_SPK7_USA.indb 1Anl_Herocco_18_20_SPK7_USA.indb 1 06.04.2022 13:53:2306.04.2022 13:53:23
Question and Answer IconNeed help?

Do you have a question about the EINHELL HEROCCO 18/20 and is the answer not in the manual?

EINHELL HEROCCO 18/20 Specifications

General IconGeneral
Impact rate5500 bpm
Impact energy (max)2.2 J
Drilling diameter in concrete (max)20 mm
ReverseYes
Product colorBlack, Red
Noise level103 dB
Power sourceBattery
Battery voltage18 V
Weight and Dimensions IconWeight and Dimensions
Depth400 mm
Width360 mm
Height120 mm
Weight2120 g

Summary

Safety Precautions

General Safety Warnings

Read operating instructions, wear ear-muffs, breathing mask, and safety goggles for injury prevention.

Safety Information

General Power Tool Safety

Adhere to safety instructions for electric shock, fire, and injury prevention.

Electrical Safety

Match tool plug to outlet, avoid grounded surfaces, use outdoor cords, GFCI in damp locations.

Personal Safety

Stay alert, use PPE, prevent unintentional starting, remove tools, maintain balance, dress properly.

Tool Operation and Care

Power Tool Use and Care

Use correct tool, don't force, maintain tools, keep cutting edges sharp, and store properly.

Battery Tool Use and Care

Use manufacturer-specified chargers, avoid damaged batteries, protect from liquids and extreme temperatures.

Environmental and Disposal Guidelines

Battery Caution and Disposal

Handle batteries carefully, avoid electrostatic discharge, dispose properly, never burn.

Product Overview and Specifications

Technical Data and Preparation

Operation Preparation

Charge battery, use sharp SDS-Plus bits, check for concealed cables, fit additional handle and depth stop.

Operation and Controls

Tool Insertion and Removal

Insert tool into chuck, lock sleeve; pull back sleeve to remove tool.

Maintenance, Storage, and Disposal

Related product manuals