EINHELL RT-RH 20 User Manual


k
Originalbetriebsanleitung
Bohrhammer
t
Original operating instructions
Rotary Hammer
p
Mode d’emploi d’origine
Marteau perforateur
C
Istruzioni per l’uso originali
Martello perforatore
lL
Original betjeningsvejledning
Borehammer
U
Original-bruksanvisning
Borrhammare
Bf
Originalne upute za uporabu
Čekić za bušenje
4
Originalna uputstva za upotrebu
Čekić za bušenje
j
Originální návod k obsluze
Vrtací kladivo
W
Originálny návod na obsluhu
Vŕtacie kladivo
N
Originele handleiding
Boorhamer
m
Manual de instrucciones original
Taladro percutor
O
Manual de instruções original
Martelo perfurador
q
Alkuperäiskäyttöohje
Poravasara
P
Instrukcją oryginalną
Młot udarowy
z
Πρωτότυπες Οδηγίες χρήσης
Πιστολετο πνευματικο
Z
Orijinal Kullanma Talimatı
Kırıcı Delici
Art.-Nr.: 42.584.25 I.-Nr.: 01019
RT-RH 20
Anleitung_RT_RH_20_SPK7:_ 16.03.2010 9:24 Uhr Seite 1

EINHELL RT-RH 20 Specifications

General

Cord length	3 m
Input power	600 W
Power source	AC
AC input voltage	220-240 V
AC input frequency	50 Hz
Impact rate	5800 bpm
Rated speed (max)	1200 RPM
Impact energy (max)	1.8 J
Drilling diameter in steel (max)	- mm
Drilling diameter in concrete (max)	20 mm
Reverse	Yes
Chuck type	SDS Plus
Product color	Black, Red

Weight and Dimensions

Depth	380 mm
Width	118 mm
Height	365 mm
Weight	2800 g

Summary

Safety regulations

Layout (Fig. 1)

Identifies the main components and parts of the rotary hammer as shown in the diagram.

Items supplied

Lists all the accessories and parts included in the product packaging.

Proper use

Defines the intended applications and limitations for using the rotary hammer correctly.

Technical data

Provides key specifications and performance details of the rotary hammer.

Sound and vibration

Details the measured sound pressure and sound power levels and vibration values.

Before starting the equipment

Additional handle (Fig. 2 – Item 6)

Instructions for fitting and positioning the auxiliary handle for safe operation.

Depth stop (Fig. 3 - Item 7)

Guidance on how to set and use the depth stop for controlled drilling depth.

Starting up

ON/OFF switch (Fig. 6/ltem 4)

Explains the function and operation of the main power switch.

Adjusting the speed (Fig. 6/ltem 4)

Describes how to control the tool's speed using the trigger pressure.

Preselecting the speed (Fig. 6/ltem 11)

Details how to set the maximum speed limit using the speed setting ring.

Clockwise/Counter-clockwise switch (Fig. 6/ltem 9)

Explains how to change the rotation direction of the tool.

Drill / Hammer drill / Chisel selector switch (Fig. 7)

Guides on selecting the operating mode: drilling, hammer drilling, or chiseling.

Replacing the power cable

Cleaning, maintenance and ordering of spare parts

Cleaning

Instructions on how to clean the tool's exterior, vents, and motor housing properly.

Carbon brushes

Guidance on checking and replacing carbon brushes, emphasizing professional servicing.

Maintenance

States that there are no internal parts requiring user maintenance.

Ordering replacement parts:

Lists the required information when ordering spare parts for the machine.

Disposal and recycling

GUARANTEE CERTIFICATE

Guarantee Terms and Statutory Rights

Explains that these terms provide additional rights beyond statutory warranty.

Coverage, Exclusions, and Usage Limitations

Details what the guarantee covers (material/manufacturing defects) and what it excludes.

Guarantee Period and Claim Submission Timeline

Specifies the guarantee duration and the timeframe for submitting claims after noticing a defect.

Procedure for Asserting Guarantee Claims

Outlines the steps required to submit a defective device for warranty service.