Need help?Do you have a question about the EINHELL RT-ID 75 and is the answer not in the manual?
General| Power | 750 W |
|---|---|
| No-load speed | 0 - 3000 rpm |
| Impact rate | 0 - 48000 bpm |
| Chuck capacity | 1.5 - 13 mm |
| Drilling capacity in wood | 30 mm |
| Drilling capacity in metal | 13 mm |
| Drilling capacity in concrete | 13 mm |
| Chuck size | 13 mm |
| Drill capacity (steel) | 13 mm |
| Cable length | 3 m |
Instructions for attaching and securing the auxiliary handle for improved stability.
Guide on how to fit and set the depth stop for precise drilling depth.
Steps to attach the dust extraction system for a cleaner work environment.
Procedure for correctly inserting and securing a drill bit into the keyless chuck.
To Next Page
