Need help?Do you have a question about the EINHELL RT-ID 65 and is the answer not in the manual?
General| Power | 650 W |
|---|---|
| Chuck Type | Keyless |
| Chuck Size | 13 mm |
| No-Load Speed | 0-2800 rpm |
| Impact Rate | 0-44800 bpm |
| Drilling capacity (wood) | 30 mm |
| Drilling capacity (metal) | 13 mm |
| Drilling capacity (concrete) | 13 mm |
Wear ear-muffs to prevent hearing damage from noise.
Wear a breathing mask to protect against hazardous dust.
Wear safety goggles to protect eyes from sparks and chips.
Presents measured sound pressure, sound power levels, and vibration emission values.
Highlights risks of lung, hearing, and vibration damage if safety measures are ignored.
Step-by-step guide for attaching the auxiliary handle for better control and stability.
Instructions for installing and setting the depth stop for precise drilling depths.
To Next Page