To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-RH 38 and is the answer not in the manual?
General safety precautions and reading operating instructions are essential for safe use.
Details the layout of the hammer drill and identifies its parts as shown in Figure 1.
Instructions for verifying that all supplied items are present upon purchase.
Advises wearing ear-muffs due to potential hearing damage from noise.
Lists potential residual risks and necessary precautions when using the equipment.
Essential safety checks before operating the tool, including power and utility checks.
Explains the importance and procedure for attaching the additional handle for stability.
Instructions on how to fit and set the depth stop for precise drilling depth.
Describes the correct procedures for inserting and removing drill bits or chisels.
Warning to use both handles to prevent electric shock if drilling into cables.
Explains the purpose of the status indicator light on the equipment.
Details the procedure for starting and stopping the hammer drill.
How to control the tool's speed by varying pressure on the ON/OFF switch.
Instructions for selecting drilling, hammer drilling, or chiseling modes.
Guidance on using the press control for optimal contact pressure during operation.
Procedures for cleaning the equipment, including safety precautions.
Guidance on checking and replacing carbon brushes if excessive sparking occurs.
Information regarding internal parts that do not require additional maintenance.
Details required information for ordering replacement parts from the manufacturer.
Lists parts subject to normal wear and tear or required for operation as consumables.
Questions to provide when reporting defects or faults for service.
Outlines the guarantee terms, consumer rights, and manufacturer's promises.
Lists conditions, misuse, and damage types not covered by the product warranty.
Instructions on how to submit a warranty claim, including proof of purchase.
Statement of compliance with relevant EU directives for the product.
Lists the specific EU standards the product adheres to.
Declaration of the product's conformity to UK standards and legislation.
Lists the UK standards the product was assessed against for compliance.
General