Need help?Do you have a question about the EINHELL TE-CD 18/50 Li-i BL and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Motor type | Brushless |
| Product design | Pistol grip drill |
| Power source | Battery |
| Battery voltage | 18 V |
| Battery capacity | 2 Ah |
| Number of batteries included | 2 pc(s) |
| Product color | Black, Red |
| Torque (max) | 50 N⋅m |
| Number of gears | 2 |
| Torque settings | 22 |
| Idle speed (max) | 1800 RPM |
| Idle speed (min) | 500 RPM |
| Chuck capacity (max) | 13 mm |
| Impact rate (high speed) | 28800 bpm |
| Drilling diameter in concrete (max) | 10 mm |
Weight and Dimensions| Weight | 2350 g |
|---|---|
| Package depth | 350 mm |
| Package width | 100 mm |
| Package height | 345 mm |
| Package weight | 3530 g |
Identifies components of the cordless drill/screwdriver as shown in Figure 1.
Lists all the components included in the product package upon purchase.
Covers charging the battery pack and checking its charge level via indicators.
Details on using the On/Off, Forward/Reverse switches, gear selection, and operating modes.
Procedure for safely inserting and securing drill bits or screwdriver bits into the chuck.
Recommendations for effective screwdriving, including screw types and torque settings.
Guidelines for cleaning the cordless drill/screwdriver after use.
Information regarding internal maintenance of the equipment.
How to order replacement parts and accessories for the product.
To Next Page
