Do you have a question about the EINHELL TE-ID 500 E and is the answer not in the manual?
Chuck type | Keyless |
---|---|
Hammer drilling | Yes |
Idle speed (max) | - RPM |
Idle speed (1st gear) | 3000 RPM |
Impact rate (high speed) | 48000 bpm |
Drilling diameter in wood (max) | 25 mm |
Drilling diameter in steel (max) | 8 mm |
Drilling diameter in concrete (max) | 10 mm |
Product color | Black, Red |
Input power | 500 W |
Power source | AC |
AC input voltage | 230-240 V |
AC input frequency | 50 Hz |
Depth | 330 mm |
---|---|
Width | 295 mm |
Height | 90 mm |
Weight | 2000 g |