To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-RH 28 5F and is the answer not in the manual?
General| Drilling Capacity in Concrete | 28 mm |
|---|---|
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 40 mm |
| Power Source | Corded Electric |
| Chuck Type | SDS-Plus |
| Number of Gears | 1 |
| Product Color | Red/Black |
Covers dangers, and the need for ear protection, breathing masks, and safety goggles.
Instruction to select functions only when the equipment is at a standstill.
Emphasizes reading all safety instructions and keeping them accessible for future use.
Lists and identifies the main parts of the hammer drill based on Fig. 1.
Details the specific items that are supplied with the product.
Specifies the tool's designed use for drilling and chiseling in concrete, rock, and brick.
Warns against using the tool for commercial, trade, or industrial purposes.
Provides details on voltage, power input, idling speed, blow rate, capacity, and weight.
Lists sound pressure/power levels and vibration emission values for various operations.
Verifying mains supply compatibility and checking the work area for hazards like cables.
Instructions for securely fitting the additional handle for safe and stable operation.
Guidance on fitting and setting the depth stop for precise drilling depth control.
Steps for swapping between SDS-Plus and quick-change drill chucks.
Procedures for inserting drill bits into both SDS-Plus and quick-change chucks.
How to operate the ON/OFF switch for starting, stopping, and continuous use.
How to adjust speed using the ON/OFF switch and its operational benefits.
Using the speed setting ring to define the maximum operational speed.
How to change the drill's rotation direction (clockwise/counter-clockwise).
Warning about the necessity of professional replacement for damaged power cables.
Instructions for regular cleaning and avoiding water damage to the tool.
Guidance on checking carbon brushes, requiring qualified personnel for replacement.
Details required for ordering replacement parts from the manufacturer.
Information on environmentally friendly disposal and recommended storage conditions.
Information on finding service partners, ordering wear parts, and consumables.
Steps for reporting issues and providing necessary details to the service center for resolution.
Explanation of consumer guarantee rights and additional warranty services provided by the manufacturer.
List of damages, misuse, and wear scenarios not covered by the product warranty.
Instructions on how to submit a guarantee claim, including required documentation.
