Need help?Do you have a question about the EINHELL TE-BD 750 E and is the answer not in the manual?
General| AC input voltage | 220-240 V |
|---|---|
| AC input frequency | 50 Hz |
| Throat depth | 152 mm |
| Angle drilling | - |
| Variable speed | Yes |
| Drilling depth (max) | 80 mm |
| Rotational speed (max) | 2500 RPM |
| Rotational speed (min) | 450 RPM |
| Drill bit diameter (max) | 16 mm |
| Drill bit diameter (min) | 1 mm |
| Chuck type | Keyless |
| Chuck mount | B16 |
| Control type | Buttons |
| Product type | Bench drill press |
| Product color | Aluminium, Black, Red |
| Drill table tilting | -45 - 45 ° |
| Drill table size (WxD) | 243 x 243 mm |
Weight and Dimensions| Depth | 780 mm |
|---|---|
| Width | 498 mm |
| Height | 320 mm |
| Weight | 44400 g |
| Package weight | 47400 g |
Important warnings about risks of injury, hearing, breathing, and eye protection.
Advice on maintaining a clean workspace to prevent accidents.
Guidelines for ensuring proper and safe working environment conditions.
Precautions to prevent accidental contact with earthed components.
Instructions to keep unauthorized persons and children away from the work area.
Recommendations for storing tools securely when not in use.
Advice on using tools within their specified capacity for optimal performance.
Guidance on selecting and using appropriate tools for specific tasks.
Recommendations on appropriate clothing and jewelry for safe operation.
Importance of wearing safety goggles and dust masks.
Guidance on using dust extraction systems for a cleaner workspace.
Instructions for safe handling and protection of the power cable.
Emphasizes using clamps or vises for secure workpiece holding.
Advice on maintaining balance and proper posture during operation.
Recommendations for tool maintenance, sharpening, and regular checks.
Instructions to disconnect power before maintenance or tool changes.
Reminder to remove tools before starting the machine.
Ensure the switch is OFF when plugging in the power cord.
Guidelines for selecting and using outdoor extension cables.
Encourages focus and common sense during operation.
Instructions for regular inspection of the tool for damage and proper function.
Emphasizes professional repair for safety and compliance.
Verifying voltage compliance and using properly earthed outlets for safe operation.
Guidelines for extension cables and measures to prevent electrical shock.
Warnings about using the device near flammable materials due to sparks.
Advice on careful handling, protective clothing, and maintaining a tidy work area.
Emphasizes focus, watching others, and secure storage of the device.
Instructions to avoid overloading and maintain a stable stance during operation.
Procedures for unplugging the device and preventing accidental activation.
Importance of focus during operation and regular checks for tool damage.
Caution against using non-specified accessories that may cause injury.
Identification of the main components of the pillar drill with numbered references.
List of accessories and components included with the product upon purchase.
Step-by-step instructions for assembling the pillar drill unit.
Guidance on securely mounting the machine in a stationary position.
Instructions for fitting and adjusting the safety chip guard.
Checks and preparations to be made before operating the equipment.
Basic instructions for switching the machine on and off.
Procedure for safely inserting drill bits and tools into the chuck.
How to change tools using the keyless chuck mechanism.
Instructions for using tools with MK tapered shanks.
How to adjust the machine's operating speed using the control lever.
Procedure for setting the maximum drilling depth.
Instructions for adjusting the drill table's angle for different tasks.
How to adjust the vertical position of the drill table.
Adjusting the drill table and extending the roll base.
Methods for securely clamping workpieces during drilling operations.
Information on the integrated LED lamp for illuminating the work area.
A guide to selecting appropriate drill speeds based on bit diameter and material.
Guidance on performing countersinking and center-drilling operations.
Specific safety advice and procedures for drilling into wood materials.
Instructions for cleaning the machine, including recommended methods and precautions.
Information on internal components that do not require additional maintenance.
Step-by-step guide for replacing the worn V-belt of the pillar drill.
Details required when ordering replacement parts or accessories.
To Next Page