To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-RH 32 4F and is the answer not in the manual?
Keep work area clean, avoid explosive environments, keep out of reach of children.
Use correct plug, avoid earthed surfaces, protect from moisture, use extension cables correctly.
Be careful, wear PPE, ensure tool cannot start accidentally.
Avoid overloading, use correct tools, handle defective switches, unplug before adjustments.
Have tool repaired by trained personnel using genuine spare parts.
Identifies components of the hammer drill using numbered figures.
Lists all items included in the package and instructions for checking completeness.
Tool designed for drilling and chiseling in concrete, rock, and brick. Not for commercial use.
Provides sound and vibration values, and technical specifications for hammer drilling and chiseling.
How to hold the machine, use the status indicator, switch on/off, and adjust speed.
Using the rotary switch to activate or deactivate the hammer stop function for gentle drilling.
Using the rotary switch to control rotation stop for hammer drilling or chiseling.
Instructions for replacing a damaged power cable with a special cable from the manufacturer.
Keep safety devices, air vents, and motor housing clean; wipe with a damp cloth and soft soap.
Information on how to order replacement parts, requiring machine type and part numbers.
Equipment should be taken to a suitable collection center for proper disposal.
Store equipment and accessories in a dark, dry place at above freezing temperature (5-30°C).
General