To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-RH 800 E and is the answer not in the manual?
General| Power | 800 W |
|---|---|
| Impact Rate | 0 - 4, 500 bpm |
| Drilling Capacity in Concrete | 20 mm |
| Drilling Capacity in Steel | 13 mm |
| Drilling Capacity in Wood | 30 mm |
| Weight | 3.5 kg |
| Impact strength | 2.5 J |
| Drilling capacity (concrete) | 20 mm |
| Chuck type | SDS-plus |
| Cable length | 3 m |
| Drill capacity (wood) | 30 mm |
| Drill capacity (masonry) | 20 mm |
| No Load Speed | 0-1000 rpm |
| Idle speed | 0 - 1, 000 rpm |
| No-load speed | 0 - 1, 000 rpm |
