To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-ID 720/1 E and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Screwdriving | No |
| Product design | Straight drill |
| Number of gears | 1 |
| Idle speed (max) | 2800 RPM |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Impact rate (high speed) | 44800 bpm |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 10 mm |
| Product color | Black, Red |
| Input power | 720 W |
| Power source | AC |
Weight and Dimensions| Weight | 1920 g |
|---|---|
| Package weight | 2430 g |
Essential safety warnings for operating the equipment, covering injury, hearing, and eye protection.
Key safety rules and guidelines to follow for safe operation.
Identifies product components and lists all included accessories.
Defines the intended applications and usage limitations of the impact drill.
Lists essential technical specifications like voltage, power, speed, and weight.
Pre-operation checks and instructions for attaching the auxiliary handle and depth stop.
Detailed steps for inserting, securing, and verifying the drill bit in the chuck.
Explains the operation of the ON/OFF switch, speed control, rotation direction, and drilling mode selector.
Guidance for effective drilling in various materials like concrete, steel, and tiles.
Safety instructions and procedures for power cable replacement.
Procedures for cleaning, checking carbon brushes, and general upkeep.
Information required when ordering replacement parts or accessories.
Guidelines for environmentally responsible disposal of the equipment and packaging.
Recommended conditions for storing the equipment and accessories to maintain their quality.
Details on service partners, wear parts, and how to report defects.
Explains the terms and conditions of the product guarantee.
