To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-BD 450 and is the answer not in the manual?
General| Chuck type | Key |
|---|---|
| Chuck mount | B16 |
| Product type | Bench drill press |
| On/off switch | Yes |
| Product color | Black, Red |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
| Throat depth | 104 mm |
| Number of speeds | 5 |
| Rotational speed (max) | 2650 RPM |
| Rotational speed (min) | 600 RPM |
| Drill bit diameter (max) | 13 mm |
| Drill bit diameter (min) | 1.5 mm |
| Drill table tilting | -45 - 45 ° |
Weight and Dimensions| Weight | 12990 g |
|---|---|
| Package depth | 398 mm |
| Package width | 251 mm |
| Package height | 471 mm |
| Package weight | 14890 g |
Comprehensive safety guidelines for operating electric tools, covering work area, electrical safety, and user conduct.
Measures for electrical safety, fire prevention, and wearing appropriate personal protective equipment.
Guidelines for maintaining a tidy workspace, proper lighting, keeping others away, and avoiding overload.
Ensuring stable footing, safe plug handling, tool inspection, and avoiding unintentional starts.
Identification of main components and parts of the drill press as shown in Figure 1.
Guidance on checking the package contents and inspecting for transport damage.
Guidelines for the intended application of the pillar drill for drilling various materials in a private sector context.
Measured sound pressure and sound power levels, and total vibration values according to EN 62841.
Pre-operation checks, including verifying mains voltage compatibility and proper earthing.
Step-by-step instructions for assembling, installing, and setting up the drill press, including chip guard.
How to operate the drill, switch it on/off, and safely fit tools into the chuck.
Guidance on inserting drill bits into the scroll chuck and the hazard of leaving the chuck key inserted.
Instructions for adjusting speeds, drill depth, table angle, and height.
Best practices for securing workpieces and selecting appropriate drill speeds based on material.
Performing specialized drilling, woodworking safety, V-belt replacement, and general cleaning.
Warning regarding the replacement of a damaged power cable by authorized personnel only.
Guidelines for cleaning, maintenance, and data required for ordering replacement parts.
Instructions for environmentally friendly disposal of packaging materials and the equipment itself.
Recommendations for storing the equipment and accessories in a dark, dry place at appropriate temperatures.
Information on contacting service partners for repairs, spare parts, and consumables.
