EINHELL TC-BD 450 User Manual

GB
- 27 -
Caution - Read the operating instructions to reduce the risk of injury.
Wear ear-mus. The impact of noise can cause damage to hearing.
Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted by the de-
vice can cause loss of sight.
Wear a breathing mask. Dust which is injurious to health can be generated when working on wood
and other materials. Never use the device to work on any materials containing asbestos!
Wear suitable, protective clothing (i.e. rugged and tight-tting) when working with the pillar
drill.
Long hair should always be bound back with a hair net (or a cap)!
Anl_SA_TC_BD_450_SPK8.indb 27Anl_SA_TC_BD_450_SPK8.indb 27 19.07.2022 13:18:2819.07.2022 13:18:28

EINHELL TC-BD 450 Specifications

General

Chuck type	Key
Chuck mount	B16
Product type	Bench drill press
On/off switch	Yes
Product color	Black, Red
AC input voltage	230 - 240 V
AC input frequency	50 Hz
Throat depth	104 mm
Number of speeds	5
Rotational speed (max)	2650 RPM
Rotational speed (min)	600 RPM
Drill bit diameter (max)	13 mm
Drill bit diameter (min)	1.5 mm
Drill table tilting	-45 - 45 °

Weight and Dimensions

Weight	12990 g
Package depth	398 mm
Package width	251 mm
Package height	471 mm
Package weight	14890 g