Need help?Do you have a question about the EINHELL TC-ID 650 E and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Hammer drilling | No |
| Number of gears | 2 |
| Idle speed (max) | - RPM |
| Chuck capacity (max) | 13 mm |
| Chuck capacity (min) | 1.5 mm |
| Idle speed (1st gear) | 2800 RPM |
| Impact rate (high speed) | 44800 bpm |
| Product color | Black, Red |
| Input power | 65023 W |
| Power source | AC |
| AC input voltage | 230 - 240 V |
| AC input frequency | 50 Hz |
Weight and Dimensions| Depth | 275 mm |
|---|---|
| Width | 71 mm |
| Height | 233 mm |
| Weight | 1800 g |
| Package weight | 2090 g |
Provides essential safety guidelines covering general operation, electrical precautions, and personal protection.
Guidelines for correct operation, tool care, and safe handling to ensure optimal performance and longevity.
Specific safety advice for using hammer drills, including handle usage and ear protection.
Highlights potential health hazards associated with tool usage, such as lung damage, hearing loss, and vibration effects.
Explains how to turn the tool on/off, adjust speed during operation, and preselect maximum speed settings.
Crucial warning regarding the danger of replacing a damaged power cable and the need for professional service.
To Next Page