EINHELL TC-ID 1000 KIT User Manual

TC-ID 1000 Kit
Art.-Nr.: 42.598.38 I.-Nr.: 11016
D Originalbetriebsanleitung
Schlagbohrmaschine
GB Original operating instructions
Impact Drill
F Instructions d’origine
Perceuse électrique à percussion
I Istruzioni per l’uso originali
Trapano a percussione
DK/ Original betjeningsvejledning
N Slagboremaskine
S Original-bruksanvisning
Slagborrmaskin
HR/ Originalne upute za uporabu
BIH vibraciona bušilica
RS Originalna uputstva za upotrebu
vibraciona bušilica
CZ Originální návod k obsluze
Příklepová vrtačka
SK Originálny návod na obsluhu
Príklepová vŕtačka
1
Anleitung_TC_ID_1000_Kit_SPK1.indb 1Anleitung_TC_ID_1000_Kit_SPK1.indb 1 08.02.16 15:3608.02.16 15:36

EINHELL TC-ID 1000 KIT Specifications

General

Brand	EINHELL
Model	TC-ID 1000 KIT
Category	Drill
Language	English

Summary

Safety Regulations

Layout and Items Supplied

Proper Use and Technical Data

Technical Specifications and Safety Data

Equipment Setup and Safety

Fitting the Additional Handle

Details how to attach and position the auxiliary handle for improved stability and control during use.

Residual Risks and Warnings

Highlights potential hazards like lung damage, hearing loss, and health issues from prolonged hand-arm vibration.

Operating Procedures

Adjusting the Depth Stop

Explains how to fit and set the depth stop accurately for desired drilling depth.

Fitting the Drill Bit

Guides on securely inserting and locking drill bits into the keyless chuck.

Using the ON/OFF Switch

Adjusting Speed Control

Drill and Hammer Drill Functions

Changing Rotation Direction

Drill vs. Hammer Drill Mode

Tips for Specific Drilling Tasks

Maintenance and Safety

Power Cable Replacement

Emphasizes that power cable replacement must be done by qualified personnel.

Cleaning the Equipment

Carbon Brushes and Maintenance

Service and Warranty Information

Service Partners and Consumables

Warranty Certificate Terms

Details warranty terms, exclusions, and the procedure for making a claim.