To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-ID 710 E and is the answer not in the manual?
General| Power | 710 W |
|---|---|
| Chuck capacity | 1.5 - 13 mm |
| Weight | 2.1 kg |
| Drilling capacity in wood | 30 mm |
| Drilling capacity in metal | 10 mm |
| Drilling capacity in concrete | 13 mm |
| Cable length | 2 m |
| Chuck size | 13 mm |
| No-load speed | 0-2700 rpm |
| Impact rate | 0-43200 bpm |
Wear ear-muffs to prevent hearing damage from noise.
Wear a breathing mask for dust protection.
Wear safety goggles to protect eyes from sparks and debris.
General safety guidelines for operating electric tools.
Precautions for safe electrical connections and usage.
Ensuring user safety during tool operation.
Instructions for tool repair and authorized service.
Have your electric tool repaired by authorized service agents.
Specific safety advice for operating drills.
Information on noise emissions and vibration values.
Instructions for attaching and positioning the auxiliary handle.
Steps for securely inserting and removing drill bits.
Procedure for replacing a damaged power cable.
Data required for ordering spare parts.
