Need help?Do you have a question about the EINHELL TC-BD 630 and is the answer not in the manual?
General| Chuck type | Key |
|---|---|
| Chuck mount | B16 |
| Product type | Bench drill press |
| Product color | Black, Red |
| Throat depth | 126 mm |
| Angle drilling | - |
| Variable speed | Yes |
| Number of speeds | 12 |
| Drilling depth (max) | 60 mm |
| Rotational speed (max) | 2450 RPM |
| Rotational speed (min) | 250 RPM |
| Drill bit diameter (min) | 1.5 mm |
| Drilling diameter in steel (max) | 16 mm |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Drill table tilting | -45 - 45 ° |
Weight and Dimensions| Depth | 765 mm |
|---|---|
| Width | 430 mm |
| Height | 195 mm |
| Weight | 32550 g |
Provides essential safety information and instructions for operating power tools.
Guidelines for maintaining a safe and clean work environment to prevent accidents.
Ensures safe use of the power tool by addressing electrical connections and precautions.
Advises on personal attentiveness, protective equipment, and preventing accidental starts.
Covers proper usage, maintenance, and safe handling practices for power tools.
Step-by-step instructions for assembling the pillar drill components.
Basic procedures for switching the machine on/off and avoiding overload.
Steps for safely inserting and clamping drill bits and other tools.
To Next Page