GB
- 10 -
10. Drill chuck
11. Spindle
12. Mounting holes
13. Folding chip guard
14. Vise
15. Securing screw
16. Screw
17. Clamping screw
18. ON switch
19. OFF switch
20. Grub screw
21. Fixing screw
22. Thumb screws
23. Transparent cover
24. Mounting frame
25. Scale ring
26. Lock bolt
27. Crank
28. Fixing screw
29. Guide sleeve
30. Gear rack
31. Drill drift
32. V-belt
33. Fastening screws
34. Tapered shank
35. Tightening screw
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made your purchase at
the latest within 5 working days after purchasing
the product and upon presentation of a valid bill
of purchase. Also, refer to the warranty table in
the service information at the end of the operating
instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Pillar drill
•
Drill chuck
•
Folding chip guard
•
Vise
•
Original operating instructions
•
Safety instructions
3. Proper use
This pillar drill is designed for drilling metal, plas-
tic, wood and similar materials. It is intended for
use in the private sector only.
Food and harmful materials may not be pro-
cessed with the machine. The drill chuck is only
designed for use with drill bits and tools with a
shaft diameter of 3 to 16 mm, and for cylindrical
tool shanks. Tools with a tapered shank can also
be used. The machine is intended for use by
adults only.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. Technical data
Nominal input voltage ................... 220V ~ 60 Hz
Nominal power level ................................. 630 W
Operating mode ................................. S2 15 min.
Motor speed ....................................... 1400 min
-1
Output speed ............................ 250 - 2450 min
-1
Speed levels .................................................. 12
Drill chuck mount ........................................ B 16
Gear rim chuck . ............................ Ø 1.5 - 16 mm
Max. shaft diameter . ................................. 16 mm
Throat ............. ........................................ 126 mm
Dimensions of drill table ... ............ 200 x 195 mm
Angle adjustment of table .. .............. 45° / 0° / 45°
Drill depth ........................... ...................... 60 mm
Pillar diameter ........ .................................. 60 mm
Height ....................................... approx. 850 mm
Base area ..................................... 350 x 230 mm
Weight ... ...................................... approx. 32.5 kg
Anl_TC_BD_630_EX_PH_SPK7.indb 10Anl_TC_BD_630_EX_PH_SPK7.indb 10 28.10.2020 13:30:5328.10.2020 13:30:53
To Next Page
Loading...
Need help?
General
Weight and Dimensions
