To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TE-HD 18/20 Li and is the answer not in the manual?
General| Drilling | Yes |
|---|---|
| Chiseling | - |
| Chuck type | SDS Plus |
| Product color | Black, Red |
| Number of gears | 1 |
| Power source | Battery |
| Battery voltage | 18 V |
| Impact rate (max) | 4750 IPM |
| Impact energy (max) | 1.8 J |
| Idle speed (1st gear) | 1300 RPM |
| Drilling diameter in wood (max) | 30 mm |
| Drilling diameter in steel (max) | 13 mm |
| Drilling diameter in concrete (max) | 20 mm |
| Battery included | No |
Weight and Dimensions| Weight | 2710 g |
|---|---|
| Package depth | 415 mm |
| Package width | 113 mm |
| Package height | 357 mm |
| Package weight | 4100 g |
Details the meaning of various safety symbols and warnings found in the manual.
Outlines essential safety rules and precautions to prevent injury and damage.
Identifies the different parts and components of the cordless hammer drill.
Lists the contents included in the product packaging upon purchase.
Provides measured sound pressure and sound power levels, and discusses hearing protection.
Instructions on fitting, adjusting, and the necessity of the additional handle for safe operation.
Details on how to attach and set the depth stop for controlled drilling depth.
Steps for safely inserting drill bits and other accessories into the tool holder.
Procedure for safely detaching drill bits and accessories from the tool.
Step-by-step guide for charging the cordless tool's battery pack using the provided charger.
Explains how to select operating modes and changeover switch functions.
Information on operating the variable speed trigger for starting and stopping the tool.
How to check the remaining charge level of the battery pack using LED indicators.
Information on the integrated LED for illuminating the work area.
Instructions on how to clean the equipment, including safety precautions.
States that no internal maintenance is required for the equipment.
Information required when ordering replacement parts or accessories.
Declares compliance with relevant EU directives and standards for the product.
Lists the harmonized European standards used for conformity assessment.
Declares compliance with applicable UK standards and legislation for the product.
Lists the British standards applied for conformity assessment in the UK.
