GB
- 17 -
3. Proper use
This tool is designed to clean vehicles, machines,
buildings, facades etc. in the private sector.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
This machine is not allowed to be used by per-
sons (including children) with reduced physical,
sensory or mental capacities or those with a lack
of experience and knowledge.
4. Technical data
Motor power supply: ......................................18V
Working pressure: ............ max. 2.4 MPa (24 bar)
Rated fl ow rate: ................................ max. 240 l/h
Max. water inlet pressure: ...........0.5 MPa (5 bar)
Water inlet temperature ............................ 5-40°C
Protection class: .......................................... IPX0
Weight: ...................................................... 2,5 kg
Important!
The equipment is supplied without batteries and
without a charger and is allowed to be used only
with the lithium-ion batteries of the Power X-
Change series!
The lithium-ion batteries of the Power X-Change
series are allowed to be charged only with Power
X-Chargers.
Suitable batteries and chargers from the Power
X-Change series are for example.
•
Battery: Power X-Change 1.5
•
Battery: Power X-Change 5.2
•
Charger: Power X-Charger 3A
•
Charger: Power X-Charger
Danger!
Sound and vibration
The sound and vibration values were measured in
accordance with EN 60335-2-54.
Sound pressure level L
pA
..................... 69.5 dB(A)
Uncertainty K
pA
.............................................3 dB
Sound power level L
WA
......................... 79.9 dB(A)
Uncertainty K
WA
.............................................3 dB
Wear hearing protection.
Noise can cause loss of hearing.
Total vibration values (vector sum of three direc-
tions) determined in accordance with
EN 60335-2-54.
Vibration emission value a
h
≤ 1.06 m/s²
Uncertainty K = 1.5 m/s²
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.
Caution!
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain resi-
dual risks cannot be rules out. The following
hazards may arise in connection with the
equipment’s construction and layout:
1. Lung damage if no suitable protective dust
mask is used.
Anl_Hypresso_18_24_Li_SPK13.indb 17Anl_Hypresso_18_24_Li_SPK13.indb 17 19.01.2023 15:47:0019.01.2023 15:47:00
To Next Page
Loading...
