What to do if the EINHELL KSE 2000/1 motor does not run?
If the motor of your EINHELL Saw isn't running, first, check the socket, cable, and plug to ensure they're properly connected and undamaged. If the cable is damaged, it should be repaired by Customer Service. Do not attempt to repair it with insulating tape. Also, damaged switches must be replaced by a Customer Service workshop.
Why does the EINHELL Saw chain become hot?
If your EINHELL Saw chain becomes hot, examine the chain lubrication and check the oil level.
What to do if EINHELL KSE 2000/1 Saw works only with difficulty?
If your EINHELL Saw is working with difficulty, check the chain tension.
What to do if the chain does not move on EINHELL Saw?
If the chain on your EINHELL Saw isn't moving, check the chain brake and release it if necessary.
How to improve cutting performance of EINHELL Saw?
If your EINHELL Saw has poor cutting performance, sharpen the chain, check that the chain is fitted correctly and check the chain tension.
Identifies all components of the chainsaw with corresponding numbers and names.
General safety rules and precautions to prevent accidents during chainsaw operation.
Detailed safety guidelines and accident prevention measures for safe handling and use of the chainsaw.
Procedure for correctly adjusting the tension of the saw chain for safe operation and performance.
Explains the function and operation of the chainsaw's chain brake system for safety.
Procedure for disengaging the chain brake to resume sawing operations.
Explains the dangerous recoil phenomenon and provides methods to avoid it.
Detailed instructions and safety precautions for safely felling trees.
Provides solutions for common problems encountered with the chainsaw and their remedies.
To Next Page
General