GB
- 20 -
Reinsert the honeycomb insert (H) and fasten
the air intake fi lter (8) to the equipment.
8.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
9. Disposal and recycling
The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
11. Disposing of batteries
Batteries contain materials that are harmful to
the environment. Never place batteries in your
household refuse, in fi re or in water. Batteries
should be collected, recycled or disposed of by
environment-friendly means. Send your old bat-
teries to iSC GmbH, Eschenstrasse 6 in D-94405
Landau. You can then be sure that the equipment
will be correctly disposed of by the manufacturer.
Anleitung_LK_70_SPK7.indb 20Anleitung_LK_70_SPK7.indb 20 27.02.2017 10:50:0627.02.2017 10:50:06
To Next Page
Loading...
