What to do if my EINHELL QH 1800 Electric Heater is not emitting heat?
If the EINHELL Electric Heater's heating elements aren't emitting heat, first ensure the appliance is switched on and the display isn't showing “0”. Also, check your household fuse or earth leakage circuit breaker (e.l.c.b.) to see if it has tripped. If it has, reset it and ensure that no other high-power devices are overloading the circuit.
Why is my EINHELL Electric Heater not emitting heat?
The EINHELL Electric Heater might not be emitting heat because it's turned off (display shows “0”), so switch it on. Another cause could be a tripped household fuse or e.l.c.b. In that case, check the fuse and reduce the number of high-power devices using the same circuit.
How to fix an EINHELL QH 1800 Electric Heater that's not emitting heat?
To fix an EINHELL Electric Heater that isn't emitting heat: * Ensure the appliance is switched on. * Check the household fuse or e.l.c.b. and reset if necessary, removing any overloading devices from the circuit.
Why is my EINHELL Heater not emitting heat?
Your EINHELL Heater might not be emitting heat because it is switched off and the display shows “0”. To resolve this, switch on the appliance. Another possible cause is that the household fuse or earth leakage circuit breaker has tripped. Check the household fuse and ensure that no other high-power devices are overloading the fuse.
General| Power | 1800 W |
|---|---|
| Voltage | 230 V |
| Frequency | 50 Hz |
| Thermostat | Yes |
| Overheat Protection | Yes |
| Heating levels | 3 (750 W / 1500 W / 1800 W) |
To Next Page
