To Next PageTo Next PageWhat to do if my EINHELL EH5000 does not work?
If your EINHELL Electric Heater isn't working, there are a few potential causes: * The power plug may not be properly connected. Ensure the power plug is securely connected. * The power switch might not be turned on. Turn on the power switch. * The socket outlet may not have power. Check the socket fuse to ensure it's working correctly.
Why is my EINHELL Electric Heater blowing out cold air?
Your EINHELL Electric Heater might be blowing out cold air because: * The desired temperature has already been reached. * The overheating guard has been triggered. Reset the overheating guard (see chapter 7.4 Overheating guard).
General| Brand | EINHELL |
|---|---|
| Model | EH5000 |
| Category | Electric Heater |
| Language | English |
Details the operation of the heat output switch, including off, fan, low, and maximum settings.
Explains how the thermostat control functions to maintain room temperature by cycling the heating element.
Describes the fan after-run function for cooling the equipment and procedures for shutdown.
Explains the function of the overheating guard, how it triggers, and how to reset it.
Instructions for cleaning the equipment casing using a damp cloth and vacuum cleaner.
Specifies that maintenance and repair work must be performed by authorized personnel.
Information required when ordering spare parts, including model, article, and ID numbers.
