EasyManua.ls Logo

EINHELL Royal MT 26 - Waste Disposal

EINHELL Royal MT 26
84 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11. Disposal
Important.
The machine is made of several different materials
such as metal, liquids and plastics. Take any
defective components and fluids that are no longer in
use to special waste disposal points. Ask your dealer
or your local council.
12. Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
GB
21
Fault Possible cause Troubleshooting
The machine does not start. Correct starting procedure not
followed.
Follow the instructions for starting.
Sooted or damp spark plug. Clean the spark plug or replace it
with a new one.
Incorrect carburetor setting. Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
The machine starts but does not
develop its full output.
Incorrect choke lever setting. Set choke lever to
Soiled air filter. Clean the air filter.
Incorrect carburetor setting. Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
The engine does not run smoothly Incorrect electrode gap on the
spark plug.
Clean the spark plug and adjust
the electrode gap or fit a new spark
plug.
Incorrect carburetor setting. Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
Engine smokes excessively Incorrect fuel mix. Use the correct fuel mix (see fuel
mixing table).
Incorrect carburetor setting. Contact an authorized customer
service outlet or send the machine
to ISC-GmbH.
13. Troubleshooting
Anleitung MT 26_SPK1:Anleitung BHS 26_D 19.06.2007 10:42 Uhr Seite 21

Table of Contents

Related product manuals