EasyManua.ls Logo

EINHELL TAF 362 User Manual

EINHELL TAF 362
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
TAF 362
GARAGENTOROEFFNER
Artikel-Nr.: 2102600
Ident-Nr.: 90018

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the EINHELL TAF 362 and is the answer not in the manual?

EINHELL TAF 362 Specifications

General IconGeneral
BrandEINHELL
ModelTAF 362
CategoryGarage Door Opener
LanguageEnglish

Summary

Komponenten / Ersatzteile

5. Technical Data

6. Functions

7. Important Notes

Maintenance

Guidelines for keeping the door opener in good working condition.

Note for service personnel

Advice for service personnel regarding component checks and shipping.

8. Montage (Assembly)

8.1 Assembling the slide

Instructions for assembling the sliding mechanism of the door opener.

8.2 Mounting the guide rails

Procedures for installing the guide rails for the door opener.

8.4 Mounting the tension cable, chain and carrier

Instructions for mounting the tension cable, chain, and carrier.

8.5 Mounting the guide rollers and lubrication instructions

Guide rollers installation and lubrication steps.

8.6 Mounting the slide pull and motor

Instructions for mounting the slide pull and the motor unit.

8.7 Assembling the guide rails and drive unit

How to assemble the guide rails and the drive unit.

8.8 Connecting the motor and transformer

Steps for connecting the motor and transformer.

8.9 Assembling the drive unit

Instructions for assembling the main drive unit.

9. Torarmmontage (Door Arm Mounting)

9.2 Important notes

Important notes for installing the door arm and related accessories.

9.4 Fitting the limit switches

How to fit the limit switches for door travel control.

9.5 Fitting the limit switches

Detailed instructions for fitting the limit switches.

9.6 Emergency Release

Instructions for installing the emergency release mechanism.

10. Starting operation and coding

10.2

Step-by-step guide for initial setup and coding the remote.

10.3 Troubleshooting for operation/coding

Guidance on resolving issues during initial setup and coding.

11. Connecting the external sensor

12. Circuit diagram

13. Trouble-shooting

14. Mounting the aerial wire

15. Special accessories

GARANTIEURKUNDE (Warranty Certificate)

Related product manuals