Need help?Do you have a question about the EINHELL TC-BG 200 and is the answer not in the manual?
General| Motor power | 400 W |
|---|---|
| Idle speed (max) | 2950 RPM |
| Grinding wheel bore | 32 mm |
| Grinding wheel diameter | 200 mm |
| Grinding wheel thickness | 25 mm |
| Number of grinding wheels | 2 |
| Spark protection shield | Yes |
| Product color | Black, Red |
Weight and Dimensions| Weight | 11800 g |
|---|---|
| Package depth | 426 mm |
| Package width | 270 mm |
| Package height | 290 mm |
| Package weight | 13050 g |
Maintain a clean workspace to prevent injuries.
Ensure suitable work area conditions, avoid hazards.
Prevent electric shock by avoiding contact with grounded surfaces.
Ensure children and visitors remain clear of the work area.
Store tools safely out of reach when not in use.
Use the tool for its intended purpose and rate.
Select and use the appropriate tool for each task.
Wear appropriate clothing and safety gear to prevent entanglement.
Always wear safety glasses, especially during dusty operations.
Protect the power cord from damage and misuse.
Use clamps or a vise to secure the workpiece for safety.
Maintain balance and avoid overreaching during operation.
Keep tools clean, sharp, and well-maintained for optimal performance.
Always disconnect power before servicing or changing parts.
Ensure all adjusting keys are removed before starting the tool.
Prevent accidental startup by ensuring the switch is off.
Use only extension cords rated for outdoor use.
Remain attentive and use common sense during operation.
Inspect parts for damage and proper function before use.
Use only recommended accessories to prevent injury.
Ensure repairs are performed by qualified experts to avoid danger.
Connect dust extraction systems where available for safety.
Perform a ring test and unloaded run to check grinding wheels.
Use only grinding wheels with correct manufacturer markings.
Store grinding wheels in a dry, temperature-stable environment.
Use only supplied clamping flanges for mounting wheels.
Ensure flanges are identical and use elastic intermediate layers.
Do not enlarge grinding wheel mounting holes.
Adjust supports and guards to be close to the wheel (max 2mm).
Use safety devices and adhere to clearance limits.
Ensure guards and supports are fitted correctly before use.
Disconnect power before changing grinding wheels.
Formula to calculate maximum circumferential speed.
Maximum permitted motor housing temperature is 80°C.
Firmly secure the grinder to a workbench before operation.
Periodically adjust the spark deflector for wheel wear.
Replace wheel when clearance limits cannot be maintained.
Illustration showing the layout of the grinder components.
Verify that all items included in the package are present.
Explanation of the S2 30 min duty cycle for the motor.
Measured sound and vibration data according to EN 61029.
Step-by-step guide to fitting the spark reflector.
Instructions for adjusting the spark reflector's position.
Guide for attaching the workpiece supports.
Instructions for positioning the workpiece supports.
Procedures and precautions for changing grinding wheels.
How to use the equipment's ON/OFF switch.
Detailed steps for performing grinding tasks.
Guidelines for keeping the equipment clean.
Information regarding internal maintenance needs.
Details required when ordering spare parts.
List of items and conditions not covered by the warranty.
Specific conditions that nullify the product warranty.
Situations and actions that invalidate the warranty.
Obligations of the buyer to ensure warranty validity.
Specifies the duration of the Einhell product warranty.
Steps to follow to correctly claim warranty service.
List of items and conditions not covered by the warranty.
To Next Page