EINHELL TC-CT 3,6 Li User Manual

GB
- 12 -
Danger! - Read the operating instructions to reduce the risk of injury
Caution! Wear ear-muff s. The impact of noise can cause damage to hearing.
Caution! Wear safety goggles. Sparks generated during working or splinters, chips and dust emitted
by the device can cause loss of sight.
Caution! Wear a breathing mask. Dust which is injurious to health can be generated when working on
wood and other materials. Never use the device to work on any materials containing asbestos!
For use in dry rooms only
Safety class II
Output connector of the charging unit (direct current): The outer part of the connector is the negative
pole and the inner part is the positive pole.
130°
If the temperature of the charging unit rises above 130 °C, the overtemperature cut-out will be activated.
The supply of current to the output is then interrupted.
Anl_TC_CT_3_6_Li_SPK7.indb 12Anl_TC_CT_3_6_Li_SPK7.indb 12 04.09.15 13:3704.09.15 13:37

EINHELL TC-CT 3,6 Li Specifications

General

Brand	EINHELL
Model	TC-CT 3, 6 Li
Category	Power Tool
Language	English