To Next PageTo Next Page
Need help?Do you have a question about the EINHELL TC-EN 20 E and is the answer not in the manual?
General| Power source | AC |
|---|---|
| AC input voltage | 220-240 V |
| AC input frequency | 50 Hz |
| Pinning | No |
| Product color | Black, Red |
| Stapling capacity | - sheets |
| Permanent stapling | Yes |
| Number of staples included | 1000 pc(s) |
Weight and Dimensions| Weight | 1090 g |
|---|---|
| Package depth | 277 mm |
| Package width | 71 mm |
| Package height | 198 mm |
| Package weight | 1570 g |
Read and keep all safety regulations and instructions for safe operation and future reference.
Details of the product's components, features, and what is included in the delivery.
Information on the intended application and limitations of the electric stapler.
Details of mains connection, shot rate, staple dimensions, protection class, and weight.
Measured levels according to EN 60745 and tips for minimizing exposure.
Wear ear-muffs due to potential hearing damage from noise impact.
Lists residual risks such as lung damage, hearing damage, and health damage from hand-arm vibrations.
Step-by-step guide on how to load staples and nails into the magazine.
How to use the filling level indicator and when to refill the magazine.
How to operate the trigger and safety locks for firing staples.
Adjusting the stapling force control for different materials and staples.
Danger if power cable is damaged; requires manufacturer or trained personnel for replacement.
Procedures for cleaning, checking carbon brushes, and general maintenance like removing jams.
Details required when ordering spare parts and accessories from the manufacturer.
Guidelines for disposing of the equipment and packaging materials responsibly.
Recommended temperature and environmental conditions for storing the electric tool.
Compliance with European Directive 2012/19/EC for electric and electronic equipment.
Information on competent service partners for repairs, spare parts, and consumables.
Identification of parts subject to normal wear and tear, required for use.
Instructions for reporting defects or faults via the internet.
Terms and conditions for consumer use, statutory rights, and free warranty services.
Details of damages not covered by the guarantee, including misuse and wear.
Procedure for making a guarantee claim, including proof of purchase and registration.
Information on competent service partners for repairs, spare parts, and consumables.
Identification of parts subject to normal wear and tear, required for use.
Instructions for reporting defects or faults via the internet.
Terms and conditions for consumer use, statutory rights, and free warranty services.
Details of damages not covered by the guarantee, including misuse and wear.
Procedure for making a guarantee claim, including proof of purchase and registration.
Declaration of conformity with EU directives and standards for the Elektrotacker TC-EN 20 E.
