EINHELL TC-LD 50 Operating Instructions

GB
- 24 -
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric and electronic equipment and
its implementation in national laws, old electric power tools have to be separated from other waste and
disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the owner of the electrical equipment
must make sure that the equipment is properly disposed of if he no longer wants to keep the equipment.
The old equipment can be returned to a suitable collection point that will dispose of the equipment in
accordance with the national recycling and waste disposal regulations. This does not apply to any ac-
cessories or aids without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers
accompanying products is permitted only with the express consent of the iSC GmbH.
Subject to technical changes
Anl_TC_LD_50_SPK9.indb 24Anl_TC_LD_50_SPK9.indb 24 22.04.2021 09:47:3322.04.2021 09:47:33

EINHELL TC-LD 50 Specifications

General

Type	Laser distance meter
Display type	Digital
Product color	Black, Red
Distance measuring units	m
Wavelength	635 nm
Laser class	2
Maximum measurement distance	50 m
Minimum measurement distance	0.05 m
Battery type	AAA
Auto power off	Yes
Battery voltage	1.5 V
Auto power off after	3 min

Weight and Dimensions

Weight	120 g
Package depth	67.8 mm
Package width	113 mm
Package height	200 mm
Package weight	310 g