Need help?Do you have a question about the EINHELL TC-SP 204 and is the answer not in the manual?
General| Power | 1500 W |
|---|---|
| Feed rate | 6 m/min |
| Idle speed | 9000 RPM |
| Dust extraction | Yes |
| AC input voltage | 230-240 V |
| AC input frequency | 50 Hz |
| Planning width (max) | 204 mm |
| Dust adapter diameter | 100 mm |
| Thickness opening (max) | 120 mm |
| Parallel guide tilt angle (max) | 45 ° |
| Surface planing material removal (max) | 3 mm |
| Thickness planing material removal (max) | 2 mm |
Weight and Dimensions| Weight | 27200 g |
|---|---|
| Package depth | 850 mm |
| Package width | 425 mm |
| Package height | 465 mm |
| Package weight | 31150 g |
| Feed table dimensions (W x D) | 370 x 210 mm |
| Thicknessing table dimensions (W x D) | 270 x 210 mm |
To Next Page
