EINHELL TE-AC 36/6/8 Li OF Set-Solo User Manual

TE-AC 36/6/8 Li OF Set-Solo
Art.-Nr.: 40.204.50 I.-Nr.: 11018
9
D Originalbetriebsanleitung
Akku-Kompressor
GB Original operating instructions
Cordless compressor
F Instructions d’origine
Compresseur sans fi l
I Istruzioni per l’uso originali
Compressore a batteria
DK/ Original betjeningsvejledning
N Akku-kompressor
S Original-bruksanvisning
Batteridriven kompressor
CZ Originální návod k obsluze
Akumulátorový kompresor
SK Originálny návod na obsluhu
Akumulátorový kompresor
NL Originele handleiding
Accu compressor
E Manual de instrucciones original
Compresor inalámbrico
FIN Alkuperäiskäyttöohje
Akku-kompressori
SLO Originalna navodila za uporabo
Akumulatorski kompresor
H Eredeti használati utasítás
Akkus-Kompresszor
RO Instrucţiuni de utilizare originale
Compresor cu acumulator
Anl_TE_AC_36_6_8_Li_OF_SPK9.indb 1Anl_TE_AC_36_6_8_Li_OF_SPK9.indb 1 24.05.2019 11:53:4124.05.2019 11:53:41

EINHELL TE-AC 36/6/8 Li OF Set-Solo Specifications

General

Brand	EINHELL
Model	TE-AC 36/6/8 Li OF Set-Solo
Category	Air Compressor
Language	English

Summary

Proper Use

Technical Data

Before Starting the Equipment

5.1 Charging the Battery (Fig. 3)

Step-by-step guide for charging the battery pack and understanding indicator status.

Assembly and Starting

6.1 On/Off Switch (Fig. 1a)

6.2 Setting the Pressure (Fig. 1a)

Operation

7.1 Tire Pressure Gauge with Adapters (Fig. 2)

Details on using the tire pressure gauge for inflation and as a blow-out pistol.

7.2 Instructions for the Adapter Set

8. Cleaning, Maintenance and Ordering of Spare Parts

8.1 Cleaning

8.2 Condensed Water (Fig. 1)

10. Charger Indicator

11. Possible Causes of Failure

The Compressor Does Not Start.

Troubleshooting steps for when the compressor fails to power on.

The Compressor Starts but There is No Pressure.

Diagnosing and resolving issues where the compressor runs but produces no pressure.

The Compressor Starts, Pressure is Shown on the Pressure Gauge, but the Tools Do Not Start.

Troubleshooting for issues where tools connected to the compressor do not operate.