EINHELL TE-DW 225 X User Manual

GB
- 20 -
Service information
We have competent service partners in all countries named on the guarantee certi cate whose contact
details can also be found on the guarantee certi cate. These partners will help you with all service re-
quests such as repairs, spare and wearing part orders or the purchase of consumables.
Please note that the following parts of this product are subject to normal or natural wear and that the
following parts are therefore also required for use as consumables.
Category Example
Wear parts* Carbon brushes, grinding/sanding plate
Consumables* Grinding/sanding paper
Missing parts
* Not necessarily included in the scope of delivery!
In the eff ect of defects or faults, please register the problem on the internet at www.isc-gmbh.info. Ple-
ase ensure that you provide a precise description of the problem and answer the following questions in
all cases:
•
Did the equipment work at all or was it defective from the beginning?
•
Did you notice anything (symptom or defect) prior to the failure?
•
What malfunction does the equipment have in your opinion (main symptom)?
Describe this malfunction.
Anl_TE_DW_225_X_SPK9.indb 20 18.02.2019 08:21:21

EINHELL TE-DW 225 X Specifications

General

Cord length	4 m
Product type	Floor polisher
Suction mode	Yes
Product color	Black, Red
AC input voltage	230-240 V
AC input frequency	50 Hz
Master (outer) case width	470 mm
Master (outer) case height	350 mm
Master (outer) case length	720 mm
Master (outer) case weight	22000 g
Quantity per master (outer) case	2 pc(s)

Weight and Dimensions

Weight	3200 g
Package depth	680 mm
Package width	215 mm
Package height	335 mm
Package weight	10000 g